Inventory Unit Detail

2024 Kubota AP-BR360

$7,799.00

$7,799.00

Key Features

New/Used New
Availability In Stock
LocationIssaquah Honda-Kubota
Stock # 184099
VIN 1143815K
Condition Excellent

Product Features

Description

The Compact Mount for the BR360 and BR460 is performance matched to the Kubota SCL1000 for optimum efficiency. This unit is ideal for demolition of concrete and rock, and as a rental tool where optimum power and breaking efficiency is required.

Features & Benefits
  • Oil fired: Oil fired units do not have a bladder of nitrogen that has to be re-filled.
  • No tie rods: Tie rods can become loose and need tightening periodically
  • Service interval = 1000 hrs.: The Hydraulic Breaker is built tough to last a long time between service intervals.
  • Higher impact rate, Up to 2600 bpm (bumps per minute): Able to complete the job faster than most machines.
  • All models operate quiet: Each model has a lower operating noise level than the competitors.
  • Standard tools included: 1 moil point and 1 chisel point: All hammers are shipped with two of the most heavily used tools to ensure the hammer is equipped to work.
  • Models with CBE span a larger hydraulic range: Fewer adjustments between power machines.
Breaker Specifications & Capacities
  • Frequency range: 1200-2600 bpm
  • Oil flow range: 5.3-12.7 gpm (20-48 Lpm)
  • Operating pressure: 1740-2030 psi (120-140 bar)
  • Pressure relief setting minimum: 2460-2760 psi (170-190 bar)
  • Pressure relief setting maximum: 3190 psi (220 bar)
  • Tool shank diameter: 1.65 in. (42 mm)
  • Net weight: 247 lbs (112 kg)
  • Carrier weight: 1.4-3 ton (1.3-2.7 m ton)
Tool Specifications - Chisel Tool
  • Part number: BH601SK
  • Length: 16 in (405 mm)
  • Weight: 9.0 lbs (4.1 kg)
Tool Specifications - Moil Tool
  • Part number: BH603SK
  • Length: 16 in (405 mm)
  • Weight: 8.6 lbs (3.9 kg)
Tool Specifications - Spade, Parallel
  • Part number: BH605SK
  • Length: 16 1/2 in (420 mm)
  • Weight: 9.0 lbs (4.1 kg)
Tool Specifications - Spade, Transverse
  • Part number: BH606SK
  • Length: 16 1/2 in (420 mm)
  • Weight: 9.1 lbs (4.0 kg)

General

Weight 247 lb. (112 kg)
Tool Diameter 1.65 in. (42 mm)
Impact Frequency Range 1200-2600 bpm
Oil Flow Range 5.3-12.7 gpm (20-48 Lpm)
Operating Pressure Range 1740-2030 psi (120-140 bar)

Shopping Tools